Effects of mineral trioxide aggregate, BiodentineTM and calcium hydroxide on viability, proliferation, migration and differentiation of stem cells from human exfoliated deciduous teeth

Abstract Objective: The aim of the study was to evaluate the effects of the capping materials mineral trioxide aggregate (MTA), calcium hydroxide (CH) and BiodentineTM (BD) on stem cells from human exfoliated deciduous teeth (SHED) in vitro. Material and Methods: SHED were cultured for 1 - 7 days in medium conditioned by incubation with MTA, BD or CH (1 mg/mL), and tested for viability (MTT assay) and proliferation (SRB assay). Also, the migration of serum-starved SHED towards conditioned media was assayed in companion plates, with 8 μm-pore-sized membranes, for 24 h. Gene expression of dentin matrix protein-1 (DMP-1) was evaluated by reverse-transcription polymerase chain reaction. Regular culture medium with 10% FBS (without conditioning) and culture medium supplemented with 20% FBS were used as controls. Results: MTA, CH and BD conditioned media maintained cell viability and allowed continuous SHED proliferation, with CH conditioned medium causing the highest positive effect on proliferation at the end of the treatment period (compared with BD and MTA) (p<0.05). In contrast, we observed increased SHED migration towards BD and MTA conditioned media (compared with CH) (p<0.05). A greater amount of DMP-1 gene was expressed in MTA group compared with the other groups from day 7 up to day 21. Conclusion: Our results show that the three capping materials are biocompatible, maintain viability and stimulate proliferation, migration and differentiation in a key dental stem cell population.

Effect of erosive challenges on deciduous teeth undergoing restorative procedures with different adhesive protocols - an in vitro study

ABSTRACT Objective: To evaluate the effect of erosive challenges on the tooth- restoration interface of deciduous teeth treated with different adhesive protocols. Material and Methods: Deciduous molars were cut mesiodistally, then embedded, abraded and polished (n=80). Samples were randomly divided according to the adhesive system used into: G1 (Adper Single Bond2®, etch-and-rinse), G2 (Universal Single Bond®, self-etching), G3 (OptibondFL®, etch-and-rinse with Fluoride) and G4 (BondForce®, self-etching with Fluoride). After standardized cavity preparation (2 mm diameter x 2 mm depth), adhesive systems were applied and samples were restored (composite resin Z350®). Half of the samples were exposed to erosive/abrasive cycles (n = 10, each adhesive group), and the other half (control group; n = 10) remained immersed in artificial saliva. For microleakage analysis, samples were submersed in methylene blue and analyzed at 40x magnifications. Cross-sectional microhardness (CSMH) was carried out (50 g/5 s) at 25 μm, 50 μm, and 100 μm from the eroded surface and at 25 μm, 75 μm, and 125 μm from the enamel bond interface. Results: Regarding microleakage, 7.5% of the samples showed no dye infiltration, 30% showed dye infiltration only at the enamel interface, and 62.5% showed dye infiltration through the dentin-enamel junction, with no difference between groups (p≥0.05). No significant difference was observed in CSMH at different depths (two-way ANOVA, p≥0.05). Conclusions: We did not observe significant changes in microleakage or CSMH after erosive/abrasive challenges in deciduous teeth treated with different adhesive protocols (etch-and-rinse and self-etching adhesives, with and without fluoride).

Molecular and morphological surface analysis: effect of filling pastes and cleaning agents on root dentin

Abstract The quality of the dentin root is the most important factor for restoration resin sealing and drives the outcome of endodontic treatment. Objective This study evaluated the effect of different filling pastes and cleaning agents on the root dentin of primary teeth using Fourier-transformed Raman spectroscopy (FT-Raman), micro energy-dispersive X-ray fluorescence (µ-EDXRF) and scanning electron microscopic (SEM) analysis. Material and Methods Eighty roots of primary teeth were endodontically prepared and distributed into 4 groups and filled according to the following filling pastes: Control-no filling (CP), Calen®+zinc oxide (CZ), Calcipex II® (CII), Vitapex® (V). After seven days, filling paste groups were distributed to 4 subgroups according to cleaning agents (n=5): Control-no cleaning (C), Ethanol (E), Tergenform® (T), 35% Phosphoric acid (PA). Then, the roots were sectioned and the dentin root sections were internally evaluated by FT-Raman, µ-EDXRF and SEM. Data was submitted to two-way ANOVA and Tukey tests (α=0.05). Results Regarding filling pastes, there was no significant difference in organic content. CP provided the lowest calcium values and, calcium/phosphoric ratio (Ca/P), and the highest phosphoric values. For cleaning agents there was no difference in organic content when compared to the C; however, T showed significantly higher calcium and Ca/P than PA. All groups showed similar results for phosphorus. The dentin smear layer was present after use of the cleaning agents, except PA. Conclusion The filling pastes changed the inorganic content, however they did not change the organic content. Cleaning agents did not alter the inorganic and organic content. PA cleaned and opened dentin tubules.

Materials used for indirect pulp treatment in primary teeth: a mixed treatment comparisons meta-analysis

Abstract: This study aimed to systematically review the literature to address the question regarding the influence of different materials in the clinical and radiographic success of indirect pulp treatment in primary teeth. A literature search was carried out for articles published prior to January 2017 in PubMed/MEDLINE, CENTRAL, Scopus, TRIP and ClinicalTrials databases; relevant articles included randomized clinical trials that compared materials used for indirect pulp treatment in primary teeth. Two reviewers independently selected the studies and extracted the data. The effects of each material on the outcome (clinical and radiographic failures) were analyzed using a mixed treatment comparisons meta-analysis. The ranking of treatments according to their probability of being the best choice was also calculated. From 1,088 potentially eligible studies, 11 were selected for full-text analysis, and 4 were included in the meta-analysis. In all papers, calcium hydroxide liner was used as the control group versus an adhesive system, resin-modified glass ionomer cement or placebo. The follow-up period ranged from 24 to 48 months, with dropout rates of 0-25.7%. The material type did not significantly affect the risk of failure of the indirect pulp treatment. However, calcium hydroxide presented a higher probability of failure. In conclusion, there is no scientific evidence showing the superiority of any material used for indirect pulp treatment in primary teeth.

Effect of EDTA on TGF-ß1 released from the dentin matrix and its influence on dental pulp stem cell migration

Abstract: Bioactive molecules stored in dentin, such as transforming growth factor beta1 (TGF-b1), may be involved in the signaling events related to dental tissue repair. The authors conducted an in vitro evaluation of the amount of TGF-b1 released from dentin slices after treatment with 10% ethylenediaminetetraacetic acid (EDTA), 2.5% sodium hypochlorite (NaOCl) or phosphate-buffered saline (PBS), and the effect of this growth factor on stem cell migration from human exfoliated deciduous teeth (SHED). Sixty 1-mm-thick tooth slices were prepared with or without the predentin layer, and treated with either 10% EDTA for 1 minute, 2.5% NaOCl for 5 days or kept in PBS. Tooth slice conditioned media were prepared and used for TGF-b1 ELISA and migration assays. Culture medium with different concentrations of recombinant human TGF-b1 (0.5, 1.0, 5.0 or 10.0 ng/mL) was also tested by migration assay. The data were evaluated by ANOVA and Tukey's test. Optical density values corresponding to media conditioned by tooth slices either containing or not containing the predentin layer and treated with 10% EDTA were statistically greater than the other groups and close to 1 ng/mL. Increased rates of migration toward media conditioned by tooth slices containing the predentin layer and treated with PBS, 10% EDTA or 2.5% NaOCl were observed. Recombinant human TGF-b1 also stimulated migration of SHED, irrespective of the concentration used. EDTA may be considered an effective extractant of TGF-b1 from the dentin matrix. However, it does not impact SHED migration, suggesting that other components may account for the cell migration.

Antimicrobial activity of different filling pastes for deciduous tooth treatment

Guedes-Pinto paste is the filling material most employed in Brazil for endodontic treatment of deciduous teeth; however, the Rifocort® ointment has been removed. Thus, the aim of this study was to investigate the antimicrobial potential of filling pastes, by proposing three new pharmacological associations to replace Rifocort® ointment with drugs of already established antimicrobial power: Nebacetin® ointment, 2% Chlorhexidine Gluconate gel, and Maxitrol® ointment. A paste composed of Iodoform, Rifocort® ointment and Camphorated Paramonochlorophenol (CPC) was employed as the gold standard (G1). The other associations were: Iodoform, Nebacetin® ointment and CPC (G2); Iodoform, 2% Chlorhexidine Digluconate gel and CPC (G3); Iodoform, Maxitrol® ointment and CPC (G4). The associations were tested for Staphylococcus aureus (S. aureus), Streptococcus mutans (S. mutans), Streptococcus oralis (S. oralis), Enterococcus faecalis (E. faecalis), Escherichia coli (E. coli), and Bacillus subtilis (B. subtilis), using the methods of dilution on solid medium – orifice agar – and broth dilution. The results were tested using statistical analysis ANOVA and Kruskal-Wallis. They showed that all the pastes had a bacteriostatic effect on all the microorganisms, without any statistically significant difference, compared with G1. S. aureus was statistically significant (multiple comparison test of Tukey), insofar as G2 and G3 presented the worst and the best performance, respectively. All associations were bactericidal for E. coli, S. aureus, S. mutans and S. oralis. Only G3 and G4 were bactericidal for E. faecalis, whereas no product was bactericidal for B. subtilis. Thus, the tested pastes have antimicrobial potential and have proved acceptable for endodontic treatment of primary teeth.

Effect of foods and drinks on primary tooth enamel after erosive challenge with hydrochloric acid

The aim of this study was to evaluate the effect of industrialised foods and drinks on primary tooth enamel previously eroded with hydrochloric acid (HCl). The crowns of one hundred two specimens were subjected to an erosive challenge with HCl and randomly divided into six groups (n = 17): Chocolate Milk (Toddynho® - Pepsico) - negative control; Petit Suisse Yogurt (Danoninho® - Danone); Strawberry Yogurt (Vigor); Apple puree (Nestlé); Fermented Milk (Yakult® - Yakult); and Home Squeezed Style Orange Juice (del Valle) - positive control. The 28-day immersion cycles for the test products were performed twice daily and were interspersed with exposure of the test substrate to artificial saliva. Measurements of enamel surface microhardness (SMH) were performed initially, after immersion in HCl and at 7, 14, 21 and 28 days of experimentation. A two-way ANOVA, according to a split-plot design, followed by the sum of squares decomposition and Tukey’s test, revealed a significant effect for the interaction between Foods and Drinks and Length of Exposure (p < 0.00001). Orange juice resulted in greater mineral loss of enamel after 28 days. None of the test products was associated with recovery of tooth enamel microhardness.

In Vitro Erosive Effect of Pediatric Medicines on Deciduous Tooth Enamel

This study evaluated, in vitro, the erosive potential of pediatric liquid medicines in primary tooth enamel, depending on the exposure time. Sixty deciduous incisors were randomly assigned to 4 groups (n=15), according to the immersion solutions: guaifenesin; ferrous sulfate; salbutamol sulfate and artificial saliva. The immersion cycles in the medicines were undertaken under a 1-min agitation, which wasperformed three times daily, during 28 days. Surface microhardness was measured at 7,14, 21 and 28 days. The titratable acidity and buffering capacity of the immersion media were determined. Data were analyzed by Analysis of Variance and Tukey's test (α=0.05). Salbutamol sulfate caused a gradual loss in enamel microhardness deciduous, observed at all times (p<0.005). Exposure to guaifenesin or ferrous sulfate resulted in significant decrease of enamel microhardness only after 28 days (p<0.005). In the control group (artificial saliva), microhardness did not changed (p>0.005) at any of the studied times. Scanning Electron Microscopy (SEM) images revealed that after 28 days the surfaces clearly exhibited structural loss, which was unlike those immersed in artificial saliva. Erosion of deciduous enamel was dependent on the type of medicine and exposure time.

Este estudo avaliou, in vitro, o potencial erosivo de medicamentos líquidos pediátricos em esmalte de dentes decíduos, em função do tempo de exposição. Sessenta incisivos decíduos foram divididos aleatoriamente em 4 grupos (n=15), de acordo com a solução de imersão: guaifenesina, sulfato ferroso, sulfato de salbutamol e saliva artificial. Os ciclos de imersão nos medicamentos foram realizados sob agitação por 1 min, três vezes ao dia, durante 28 dias. As medidas de microdureza superficial foram realizadas após 7, 14, 21 e 28 dias. A acidez titulável e capacidade tampão dos meios de imersão foram determinadas. Os dados foram submetidos à Análise de Variância e teste de Tukey (α=0,05). O sulfato de salbutamol causou uma perda gradual na microdureza do esmalte decíduo, em todos os tempos verificados (p<0,005). A exposição à guaifenesina ou ao sulfato ferroso levou à diminuição significante da microdureza do esmalte, apenas após 28 dias (p<0,005). No grupo controle (saliva artificial) não houve alteração (p>0,005) da microdureza em nenhum dos tempos estudados. As imagens de microscopia eletrônica de varredura (MEV) revelaram que após 28 dias, as superfícies expostas aos medicamentos apresentaram perda estrutural, diferindo dos que foram imersos em saliva artificial. A erosão do esmalte decíduo foi dependente do tipo de medicamento e do tempo de exposição.

Effect of Nd:YAG laser combined with fluoride on the prevention of primary tooth enamel demineralization

Most studies dealing with the caries preventive action of Nd:YAG laser have been done in permanent teeth and studies on primary teeth are still lacking. The aim of this study was to evaluate in vitro the effect of Nd:YAG laser combined or not with fluoride sources on the acid resistance of primary tooth enamel after artificial caries induction by assessing longitudinal microhardness and demineralization depth. Sixty enamel blocks obtained from the buccal/lingual surface of exfoliated human primary molars were coated with nail polish/wax, leaving only a 9 mm² area exposed on the outer enamel surface, and randomly assigned to 6 groups (n=10) according to the type of treatment: C-control (no treatment); APF: 1.23% acidulated phosphate fluoride gel; FV: 5% fluoride varnish; L: Nd:YAG laser 0.5 W/10 Hz in contact mode; APFL: fluoride gel + laser; FVL: fluoride varnish + laser. After treatment, the specimens were subjected to a des-remineralization cycle for induction of artificial caries lesions. Longitudinal microhardness data (%LMC) were analyzed by the Kruskal-Wallis test and demineralization depth data were analyzed by oneway ANOVA and Fisher’s LSD test (á=0.05). APFL and APF groups presented the lowest percentage of microhardness change (p<0.05). Demineralization depth was smaller in all treated groups compared with the untreated control. In conclusion, Nd:YAG laser combined or not with fluoride gel/varnish was not more effective than fluoride alone to prevent enamel demineralization within the experimental period.

A maioria dos estudos que utilizam o laser Nd:YAG com ação preventiva são em dentes permanentes, e são escassos os estudos em dentes decíduos. Desta forma, o objetivo do presente estudo foi avaliar in vitro o efeito do laser Nd: YAG combinado ou não com flúor na resistência ácida do esmalte decíduo após a indução de cárie artificial, através da avaliação de microdureza longitudinal e profundidade da desmineralização. Para tanto, foram selecionados 60 fragmentos de esmalte obtidos a partir da superfície bucal / lingual de molares decíduos irrompidos, os quais foram isolados com esmalte de unha e cera, deixando uma área exposta de 9 mm² na superfície do esmalte. Os espécimes foram divididos aleatoriamente em 6 grupos (n = 10) de acordo com o tipo de tratamento: C- Controle: sem tratamento; APF: aplicação de gel flúor fosfato acidulado 1,23%; FV: aplicação de verniz fluoretado 5%; L: aplicação do Laser Nd:YAG 0,5 W/10 Hz no modo contato; APFL: aplicação de gel flúor fosfato acidulado + Laser Nd:YAG; FVL: aplicação de verniz fluoretado 5% + Laser Nd:YAG. Após os tratamentos, os espécimes foram submetidos a um ciclo de desremineralização para a indução de lesão de cárie artificial. Os dados de microdureza longitudinal (%LMC) foram avaliados pelo teste de Kruskal-Wallis e os dados de profundidade da desmineralização foram avaliados pelos testes ANOVA e Fisher’s LSD (α=5%). Observou-se que os grupos APFL e APF apresentaram menor percentual de perda de dureza (p<0,05). A profundidade de desmineralização foi menor em todos os grupos tratados em comparação com o controle. Em conclusão, o laser Nd: YAG associado ou não com flúor/verniz não foi mais efetivo do que o flúor sozinho para prevenir a desmineralização do esmalte durante o período experimental.

Carisolv as an endodontic irrigant in deciduous teeth: An SEM study.

Aim: Root canal irrigation plays an important role in the debridement and disinfection of the root canal system. "The purpose of this study was to evaluate the efficacy of Carisolv TM , 1% sodium hypochlorite (NaOCl) gel, and 1% NaOCl solution as root canal irrigants in deciduous anterior teeth." Materials and Methods: Thirty-six extracted deciduous anterior teeth were used. Root canals were flooded with NaOCl solution in Group A, NaOCl gel in Group B and Carisolv TM in Group C and incubated for 30 min. Scanning electron microscope photomicrographs of canal wall debris in the apical, middle and coronal thirds were scored. Results: The results showed that regardless of irrigation regime, canals were consistently cleaner in the coronal and middle thirds than in the apical thirds. NaOCl solution, NaOCl gel, and Carisolv TM had comparable activity at coronal third and middle third of root canals. At the apical third, NaOCl solution cleaned canals better than NaOCl gel and Carisolv TM . Carisolv TM cleaned debris better than NaOCl gel at the apical third. Conclusion: Carisolv TM can be used as an adjunct to root canal preparation.

Influence of chlorhexidine application on longitudinal adhesive bond strength in deciduous teeth

The aim of this study was to evaluate the influence of applying 2 percent chlorhexidine for 30 seconds after phosphoric acid conditioning of dentin on the immediate and long-term bond strengths in deciduous teeth. The occlusal enamel was removed from 40 human sound deciduous molars, which were exfoliated by natural means, and the dentin was conditioned with 37 percent phosphoric acid for 15 seconds and washed with running water. The specimens were divided into two groups of 20 teeth. The test group received an application of 2 percent chlorhexidine for 30 seconds prior to a three-step etch-and-rinse adhesive system, whereas the control group received only the adhesive system. Three cylindrical restorations were made with a composite resin for each tooth. Ten teeth in each group were submitted to a microshear bond strength test after 24 hours, while the remaining teeth were stored in distilled water at 37 °C for 6 months before testing the microshear bond strength. The test group had a higher bond strength than did the control group after 6 months of storage. No statistical differences were found when groups with the same dentin treatment were compared at different times. Short applications of chlorhexidine at low concentrations prevent hybrid layer degradation and positively affect bond strength over time.

Morphology of the dentin on primary molars after the application of phosphoric acid under different conditions

The aim of this study was to evaluate changes in the superficial dentin pattern of primary teeth after applying different phosphoric acid concentrations and conditioning times. Twenty-four dentin surfaces were divided in 4 groups with 10 teeth each: GI -no treatment; GII to GIV -phosphoric acid at 37 percent, 32 percent, and 10 percent respectively. The samples were divided into two halves: one treated for 7 seconds (T1) and the other one for 15 seconds (T2). They were submitted to scanning electronic microscopy (SEM). A reticule was superimposed upon the images to randomly select dentinal tubules measured in µm². The conditioning times did not cause significant differences in the mean diameter values of the dentin tubules within each test group: GII (T1= 4.86; T2= 4.70); GIII (T1 = 3.83; T2= 3.08); GIV (T1= 5.04; T2= 5.23). Comparing different groups, there were no differences in T1. The same results were observed in T2, except for GIV which presented higher mean diameter values than GIII. The extent of acid conditioning did not influence tubule opening within groups. When different types of acids where compared, only the 10 percent phosphoric acid showed upper tubule opening than 32 percent phosphoric acid. The dentin pattern varied according to the type of acid used for conditioning.

Histopathological evaluation of root canal filling materials for primary teeth

This study aimed to assess the response of apical and periapical tissues of dogs' teeth after root canal filling with different materials. Forty roots from dogs' premolars were prepared biomechanically and assigned to 4 groups filled with: Group I: commercial calcium hydroxide and polyethylene glycol-based paste (Calen®) thickened with zinc oxide; Group II: paste composed of iodoform, Rifocort® and camphorated paramonochlorophenol; Group III: zinc oxide-eugenol cement; Group IV: sterile saline. After 30 days, the samples were subjected to histological processing. The histopathological findings revealed that in Groups I and IV the apical and periapical regions exhibited normal appearance, with large number of fibers and cells and no resorption of mineralized tissues. In Group II, mild inflammatory infiltrate and mild edema were observed, with discrete fibrogenesis and bone resorption. Group III showed altered periapical region and thickened periodontal ligament with presence of inflammatory cells and edema. It may be concluded that the Calen paste thickened with zinc oxide yielded the best tissue response, being the most indicated material for root canal filling of primary teeth with pulp vitality.

O objetivo deste estudo foi avaliar a resposta dos tecidos apicais e periapicais de dentes de cães, após obturação dos canais radiculares com diferentes materiais indicados para dentes decíduos. Foram utilizados pré-molares de cães, totalizando 40 raízes que, após pulpectomia e preparo biomecânico, foram divididas em 4 grupos, nos quais os canais radiculares foram obturados com os seguintes materiais: Grupo I - pasta comercial composta de hidróxido de cálcio e polietileno glicol 400 (Calen®) espessada com óxido de zinco; Grupo II - pasta composta de iodofórmio, Rifocort® e paramonoclorofenol canforado; Grupo III - cimento de óxido de zinco e eugenol; e Grupo IV - solução salina. Decorridos 30 dias, as peças foram submetidas ao processamento histológico. De acordo com os resultados da análise histopatológica observou-se que nos Grupos I e IV as regiões apical e periapical apresentaram aspecto de normalidade, com grande número de fibras e células e ausência de reabsorção dos tecidos mineralizados. No Grupo II observou-se infiltrado inflamatório e edema leves, com discreta fibrogênese e reabsorção óssea. O Grupo III apresentou alteração na região periapical e ligamento periodontal ampliado, com presença de células inflamatórias e edema. Os resultados obtidos permitiram concluir que a pasta Calen espessada com óxido de zinco apresentou a melhor resposta tecidual, sendo a mais indicada para a obturação de canais radiculares de dentes decíduos com vitalidade pulpar.

Clinical and radiographic comparison of primary molars after formocresol and electrosurgical pulpotomy: a randomized clinical trial.

BACKGROUND: Vital pulpotomy is a single-stage procedure defined as the surgical amputation of the coronal portion of exposed vital pulp, usually as a means of preserving the vitality and function of the remaining radicular portion. OBJECTIVES : The aim of this study was to compare the clinical and radiographic success rates for electrosurgical vs formocresol pulpotomy in human primary molar teeth. SETTINGS AND DESIGN: This was a prospective, randomized clinical trial. MATERIALS AND METHODS: In this randomized clinical trial, pulpotomies were performed on 70 primary molars in children aged 5-10 years. The teeth were treated using either a conventional formocresol (35 teeth) or electrosurgical technique (35 teeth). Following the pulpotomy procedure, the teeth were evaluated for clinical and radiographic success for three, six and nine months. The teeth were evaluated for the presence of pain, abscess, fistula, mobility, internal and external resorption, and radiolucency. STATISTICAL ANALYSIS: The data were assessed with Fishers' Exact test. RESULTS: After nine months of follow-up, the clinical and radiographic success rates were 96 and 84% respectively in the electrosurgical group and 100 and 96.8% respectively in the formocresol group. There was no statistically significant difference between the success rates in the two groups ( P > 0.05). CONCLUSIONS: Our results showed the failure rates for electrosurgical pulpotomy to be equal to those for formocresol pulpotomy. Although electrosurgical pulpotomy is a nonpharmacological technique giving favorable results, it is still a preservative technique. Further studies using larger samples and longer evaluation periods are recommended.

Effect of the sodium hypochlorite and citric acid association on smear layer removal of primary molars

O objetivo deste estudo foi avaliar a capacidade da associação entre hipoclorito de sódio e ácido cítrico em diferentes concentrações para remover "smear layer" (SL) coronária de dentes decíduos. Para isso, foram utilizados 28 molares decíduos, nos quais se realizou a remoção do teto e do assoalho da câmara pulpar, obtendo-se discos de esmalte e dentina. Produziu-se SL nas paredes internas dos discos utilizando-se brocas em alta rotação e eles foram irrigados com hipoclorito de sódio a 1%, ácido cítrico em diferentes concentrações (AC- 4%, AC- 6%, AC-8% e AC-10%) e cloreto de sódio a 0,9%. As amostras foram esplitadas e observadas no MEV. Foram atribuídos escores às fotomicrografias obtidas, de acordo com a quantidade de SL presente. Observou-se que todas as concentrações de ácido cítrico empregadas após o hipoclorito de sódio foram capazes de remover SL. Os resultados foram analisados pelo teste de Kruskal-Wallis, não havendo diferença estatística significativa entre os escores dos grupos testados. Verificou-se, entretanto, que AC-8% AC-10% promoveram destruição de dentina peritubular e que AC-4% apresentou maior número de amostras com SL densa. A partir dos resultados obtidos sugere-se a utilização de ácido cítrico a 6,0% em associação ao hipoclorito de sódio a 1% como substâncias químicas auxiliares para irrigação de dentes decíduos.

Effect of 0.02 percent NaF solution on enamel demineralization and fluoride uptake by deciduous teeth in vitro

A aplicação da solução de NaF a 0,02%, no lugar de dentifrício fluoretado, tem sido sugerida para ser aplicada com cotonete nos dentes de bebês para reduzir o risco de fluorose dental. Como o efeito anticariogênico dessa recomendação não tem sido estudado, avaliou-se in vitro seu efeito na redução da desmineralização e incorporação de fluoreto no esmalte de dentes decíduos; dentifrício não fluoretado e fluoretado (1.100 mg F/g) foram utilizados como controles negativo e positivo, respectivamente. O dentifrício fluoretado foi mais efetivo que a solução de NaF a 0,02% na redução de desmineralização e na incorporação de fluoreto no esmalte (p < 0,05). Os dados sugerem que uso alternativo de NaF a 0,02% ao invés de dentifrício fluoretado para reduzir o risco de fluorose dental deve ser reavaliado, especialmente se a cárie dental precisa ser controlada.

Effects of a non-rinse conditioner on the enamel of primary teeth

O objetivo deste estudo in vitro foi de avaliar ao microscópio eletrônico de varredura os aspectos morfológicos do esmalte de dentes decíduos após condicionamento com ácido fosfórico a 36 por cento ou com um agente condicionador não lavável. Foram selecionados 10 dentes decíduos anteriores esfoliados naturalmente. As amostras sofreram limpeza coronária com pasta de pedra-pomes e água, em baixa-velocidade. O condicionamento foi realizado no esmalte da face vestibular. Os espécimes foram divididos em dois grupos: G1 (n=10): condicionamento com ácido fosfórico a 36 por cento na forma de gel - Conditioner 36 (Dentsply) durante 20 segundos, seguidos de lavagem com água durante 15 segundos; G2 (n=10): condicionamento com NRC - Non Rinse Conditioner (Dentsply) durante 20 segundos, seguidos de secagem com ar durante 15 segundos. As amostras foram desidratadas, montadas em bases metálicas e cobertas com ouro para análise ao microscópio eletrônico de varredura (Jeol JSM 6.100). A análise da eletromicrografias revelou que ambos os agentes condicionadores foram efetivos para condicionar o esmalte de dentes decíduos, causando microporosidades mas com melhor resultado quando utilizou-se o ácido fosfórico a 36 por cento na forma de gel.

Cuantificación de pérdida de esmalte primario y permanente con la utilización de un sistema de aire abrasivo / Cuantification of the loss of primary and permanent enamel with the use of an air abrasive system

Los sistemas de aire abrasivo, desarrollados en los años 40 para la remoción de la estructura dentaria, resurgieron con la tecnologia adhesiva, particularmente para uso pediátrico. El objetivo de este trabajo es cuantificar la pérdida de masa de esmalte primario y permanente empleando diferentes tamaños de particulas de oxido de aluminio y bicarbonato de sodio, a diferentes presiones. A 10 piezas primarias y 10 permanentes se les aplicaron 7 tratamientos: con particulas de bicarbonato de sodio a alta presion y de oxido de aluminio de 27 y 50 um a presiones baja, media y alta. Todas las muestras fueron pesadas antes y después de la aplicacion de cada tratamiento. De los resultados obtenidos puede concluirse que este sistema es apto para profilaxis, y que en esmalte permanente la pérdida de masa está relacionada con el tamaño de la particula de oxido de aluminio, pero no con la presión empleada, mientras que en primario ambas variables provocan la diferencia.

Adhesión de nuevos materiales dentales en dientes primarios con fluorosis / Adhesion of new dental materials im primary teeth with fluorosis

El objetivo del presente estudio fue evaluar la adhesión a la resistencia traccional de una resina reforzada y un cemento de ionómero vítreo a dientes primarios fluorados, a fin de tomar decisiones sobre el uso de materiales dentales adhesivos en zonas con alto contenido de fluor en el agua. Ochenta dientes primarios extraídos por caries se agruparon en: Grupo A (control) sin flúor en el agua y Grupo B: con un tenor de flúor en el agua de 0.8 a pp.m. Ambos grupos fueron divididos en 4 subgrupos y tratados de la misma forma: Se prepararon superficies planas a iguales niveles sobre esmalte (Grupo Aa y Ba) y dentina (grupos Ab y Bb). Sobre esas superficies se confeccionaron probetas cilíndricas de 3.6 mm. de diámetro con resinas compuestas y técnica de grabado ácido (grupo Aa1 y Ba1), con resina compuesta y agente de enlace (grupo Ab1 y Bb1) y con cemento de ionómero vítreo (grupos Aa2, Ab2, Bb2, Ba2). 24 hs. después de inmersión en agua a 37§C se determinó la resistencia de la unión por tracción. El análisis estadístico mostró: Grupo Aa1: x 5.90 y de 1.88; Grupo Ba1: x 6.85 ds. 0.24; Grupo Ab1: x 5.56 ds 0.67; Grupo Bb1: x 1.21 ds 0.22; Grupo Aa2: x 1.23 ds 0.32; Grupo Ba2: x 1.78 ds 0.5; Grupo Ab2: x 0.58 ds 0.08; Grupo Bb2: x 0.68 ds 0.28. No se encontró diferencias significativas entre los grupos Aa1, Aa2 y Ba2, Ab2 y Bb2; hubo diferencias significativas entre Ab1 y Bb1. En dientes de áreas con alto contenido de flúor es posible alcanzar valores de adhesión equivalentes a los de zonas sin flúor en las aguas